|
Reliable Heating Solutions Flexible Oil Reservoir Heating Pads Engine Heaters and Battery Warmers Made in USA |
|
Oil Filter Heater/Fuel Filter Heater
THF50 & THF100
12 volts dc - 24 volts dc
![]() |
|
Winter Weather brings problems to fuel and oil filters. Fuel & oil becomes too "thick" to pass through the fine pores in the filter element. When the fuel "GELS" it won't flow and the engine will not start. Engine wear is increased when the flow of lubricating oil is restricted in the filter element. Fuel filters also suffer from additional restrictions if there is any water or moisture in the fuel which will freeze in the filter element.
The solution is to warm the filter housing to summer temperatures. This allows suffient fuel flow to start the engine and unplugs the oil filter to increase the flow. Residual heat in the filter housing helps warm the fuel & oil passing through it.
The product is our FILTER HEATER. This is a 12 volt, flexible heating pad that wraps around the filter housing. The FILTER HEATER can be quickly and easily installed on numerous sizes of filters using the adjustable Velcro straps.
By warming the fuel filter, for example, the fuel temperature will increase above the Pour Point and melt any fuel/ice slush. This will permit sufficient fuel to flow to the injection system to allow the engine to start and warm up.
If necessary, the heater can be left on while the vehicle is operating on the road.
Technical Information:
The Filter Heater, model THF50 is 50 watts, 12 volts DC and draws 4 amps.
Model THF100 is 100 watts, 12 volts DC and draws 8 amps.
Units are also available in 24 vdc and 240 vac.
![]() |
Dimensions:
Overall size of pad 12" x 4"
Size of heating area 8.75" x 4"
Lead Wire (2) 18" L
Minimum Filter Housing Diameter 3.5"
Maximum Filter Housing Diameter 4.75 - 5.0"
Home | Model Specifications | Description | Applications | Sizing | Technical | Filter Heater
Battery Warmer | Heater-Stat | FAQ | Info Request | International Distributors | Site Map
|
|
INDUSTRIAL DIESEL |